|
Astro Performance Warehouse T-Shirts Now Available!
You've asked for them, and now they are finally completed! T-Shirts can be ordered over the phone or thru the website. We currently have 2 Sizes Available (Large & X-Large).

-Front Side of T-Shirt- -Back Side of T-Shirt-
2010 New Products & Services from Astro Performance
1.) Countershaft Support Plate 2.) Carbon Pro Rings for TKO 5 Speeds

3.) Cryogenic Processing 4.) REM Polishing

5.) G-Force TR-3650 Gear Kit

1.) Cluster Support Plate $55.00
Now supplied with Peel and Place Shim Kit! The Shim Kit is a Must to ensure recommended 0-End Play & +2" Lbs. of Pre-Load. Plate features Astro Performance Logo & Website that are engraved into the Blue Anodized finish. Plate reinforces Rear Main Casing so that High Helix Angle Gear Kits don't crack the area in between the Rear Mainshaft and Counter-Shaft Journals.
2.) Carbon Pro Upgrade Kit $229.95
Can't shift your Tremec 5 Speed @ Higher RPM's? Astro Performance has the solution. Astro Performance is proud to announce Carbon Fiber Lined Synchronizer Rings for Tremec TR3550/TKO/TKO-500/TKO-600 5 Speed Transmissions for Dodge/Ford/GM Applications. The Kit includes 2 Carbon Fiber Lined Synchronizer Rings, Selective Maindrive & Cluster Shim Kit, and Hand-Crafted Shift Selector Finger to allow High RPM Shifts in excess of 6,500 RPM! The Carbon Fiber Lined Rings are also available in a Kit of 5 if wanting to upgrade all 5 Gears for $325.00. We recommend changing 2nd and 3rd Gear Rings out, due to those two being the one's generally subjected to hard-shifts.
3.) Cryogenic Services $Call for Pricing The Cryogenic Process is a process of Deep Freezing a Wide Variety of Materials, such as ferrous and non-ferrous Metals, Alloys, Carbides, Plastics (including Nylon and Polymers), and Ceramics. The process involves holding the components being cryo'd at -310 Degrees Celcius for a period of up to 36 Hours. After the Deep Freeze Process the Parts are brought back up to Normal Room Temperature thru a Mild Heat Cycle to complete the process.
Cryogenics is not a surface treatment. If affects the entire mass of the components being treated. The Process makes the Component(s) stronger throughout and dramatically reduces wear. This means the process keeps working for the life of the component(s) rather than ceasing to be effective after the surface is worn or otherwise damaged. The Hardness of the Material Treated is un-affected so there is actually less tendency to crack or chip while its strength and durability is increased. The Process uses a Computer that duplicates the Optimal Thermal Curve. It precisely regulates the temperature change and brings an absolute consistency not available in any other tempering process.
4.) REM Polishing $Call for Pricing
What is the REM Process?
REM ISF (Isotropic Superfinish) is a unique patented process that generates a non directional low Ra Surface. It employs mass finishing equipment in conjuction with accelerated refinement chemistries that are non-hazardous and environmentally friendly. Among its many benefits, an ISF surface reduces friction and wear, increases part durability, and improves corrosion resistance. The process has proven application in many industries including aerospace, automotive, gearing and bearings, medical, military, motorsports, off-highway, and power generation.
Advantages of the REM Process
-Reduce Friction
-Increase Part Durability
-Improve Corrosion Resistance
-Reduce Wear
-Reduce Lubrication Requirements and Cost
-Improve Oil Retention Properties
-Reduce Contact and Bending Fatigue
-Improve Pitting Resistance
-Reduce Vibration and Noise
-Reduce Applied Torque Requirements
-Produce a Uniform Surface Finish
-Produce a Superior Surface Finish
-Eliminate Break-in
-Extend Component Life
-Reduce Metal Debris
-Reduce Part Failures
-Minimize Overheating
5.) G-Force TR-3650 5 Speed Gear Kit
Astro Performance is proud to announce a Upgrade for 2001-2004 Mustang 4.6L 5 Speed Manual Transmissions. This Upgraded Gear Kit will support over 800+HP @ Flywheel. The Gear Kit requires use of a 2005-Up Mustang 4.6L TR-3650 1st & Rev. Mainshaft Gears. The G-Force Gear Kit features different tooth counts on the "Head Set" that change the 1st Gear Ratio to a 2.90 (Close Ratio) so that you get the most out of 1st Gear with a Low Rear End Ratio. In addition, the G-Force Gear Kit will two of the most Fuel Efficient Overdrives available: .53 or .58! The only required upgrade to install the Transmission into vehicle after G-Force Gear Kit has been installed is to upgrade to a 26 Spline Input Shaft ( 1 1/8"). The Upgrade will still allow use of Stock or Aftermarket Bellhousing, Shifter, Cross-Member, and Driveshaft! Astro is currently working on a "Road Race" Style 5th Gear Kit for this upgrade!
Astro Performance will sell the Upgraded 2nd, 3rd, Input, Cluster, 1st Gear, and Rev. for $1,695.00. This Kit will work in all 2001-04 Ford Mustang 4.6L TR-3650 Cores. Please call (866) 253-0019 for more details!
Return Policy:
Any New Item Purchased that was not specially ordered or manufactured can be returned with consent of Astro Performance Warehouse. Plus, the Customer wanting to return the product must do so within 30 Days of Invoice Date, along with supplying a copy of the Invoice with the Component(s). The customer must return the package to Astro Performance Warehouse at their own expense. Upon the package arriving at our Warehouse, the package will be inspected and then credited in to our stock. Any item returned is subject to a 20% Restocking Fee. Refund is applied back to customers Credit Card or Mailed. Please inquire with any questions regarding our Return Policy.
|